About This File
Fuel_Tank By [rD]MrPink
Specifications of fuel tank:
Options:
Gravity fitting.
Water Draw-off
OSHA Ladders and catwalks.
Custom coatings (interior and exterior).
Integral spill containment (double-wall).
Overfill catch basins (various sizes).
Fill-limiters.
Remote gauging systems.
Fittings including overfill protection, fill caps, vent caps and others.
Standard Features:
Emergency vent riser (24 inches) and emergency vent cap.
Openings are female national pipe thread (FPNT).
Tanks 5,000 gallons and over are supplied with an 18" manhole per UL-142.
Tanks are designed for stationary use and require some sort of support structure.
Exterior paint is red iron oxide primer, interior is unpainted.
All UL-142 tanks include (2) 2" FNPT fittings in the top of the tank
Nominal Gallons
Diameter
Length
Steel Thickness
Weight (Lbs)
Normal Vent
Emergency Vent
Comments
300
38.5"
5'-0"
12 Ga
300
1 1/4
4" C&B
375
38.5"
6'-4"
12 Ga
300
1 1/4
4" C&B
Containment for 300
500
45.5"
6'-0"
12 Ga
400
1 1/4
4" OPW 202
600
45.5"
7'-4"
12 Ga
500
1 1/4
4" OPW 202
Containment for 500
550
48.0"
6'-0"
12 Ga
400
1 1/4
4" OPW 202
650
48.0"
7'-4"
12 Ga
500
1 1/4
4" OPW 202
Containment for 550
1,000
64.0"
6'-0"
10 Ga.
820
1 1/4
4" OPW 202
1,200
64.0"
7'-4"
10 Ga.
1,300
1 1/4
6" C&B
Containment for 1,000
1,100
64.0"
6'-8"
10 Ga.
1,200
1 1/4
4" OPW 202
1,300
64.0"
8'-0"
10 Ga.
1,400
1 1/4
6" C&B
Containment for 1,100
1,500
64.0"
9'-0"
3/16
1,500
1 1/4
6" C&B
2,000
64.0"
12’-0"
3/16
1,900
1 1/4
6" OPW 202
2,000
75.5"
9’-0"
3/16
1,800
1 1/4
6" OPW 202
2,500
75.5"
11’-0"
3/16
2,100
1 1/2
6" OPW 202
3,000
75.5"
13’-0"
3/16
2,400
2
8" C&B
3,500
75.5"
15’-0"
3/16
2,700
2
6" OPW 202
4,000
75.5"
17’-0"
3/16
3,000
2
8" C&B
5,000
95.5"
14’-0"
1/4
4,600
2
8" Morrison 244M
5,500
95.5"
14'-8"
1/4
4,800
2
8" Morrison 244M
Containment for 5,000
6,000
95.5"
17’-0"
1/4
5,400
2
8" Morrison 244M
6,500
119.0"
11’-0"
1/4
5,100
2
8" Morrison 244M
7,000
95.5"
19’-6"
1/4
6,000
2
8" Morrison 244M
7,500
95.5"
21’-0"
1/4
6,400
2
8" Morrison 244M
8,000
95.5"
22’-0"
1/4
6,600
2
8" Morrison 244M
8,000
119.0"
14’-0"
1/4
6,000
2
8" Morrison 244M
10,000
95.5"
28’-0"
1/4
8,200
2 1/2
8" Morrison 244M
10,000
119.0"
17’-6"
1/4
7,100
2 1/2
8" Morrison 244M
12,000
95.5"
33’-0"
1/4
9,400
2 1/2
8" Morrison 244M
12,000
119.0"
21’-0"
1/4
8,300
2 1/2
8" Morrison 244M
15,000
95.5"
41'-0"
1/4
11,500
2 1/2
10" Morrison 244F
15,000
98.0"
38'-6"
1/4
11,200
2 1/2
10" Morrison 244F
15,000
119.0"
26’-0"
1/4
9,800
2 1/2
8" Morrison 244M
20,000
119.0"
35’-0"
1/4
12,700
3
10" Morrison 244F
25,000
132.0"
36’-0"
1/4
14,600
3
10" Morrison 244F
Note: dimensions and weight are approximate.
Thanks to Greer Tanks.
Instructions:
Unzip the zip file into your ETMain Directory, if you get a warning about directories
already in this folder, click yes, I wont hurt anything. You must ALSO unzip this into any
.pk3s you put your map in. You will find the model in gamemain/models/mapobjects/[rD]MrPink.
It is called Fuel_Tank.md3