Government / Defense

ETS-Lindgren's Model 1062-1.2B is a low profile, manually operated, nonmetallic turntable designed for pre-scan measurements.

ETS-Lindgren's Model 2006 Light Duty Azimuth Positioner is designed to provide azimuth rotation of a lightweight test object.

ETS-Lindgren's Model 2165 LoPro Turntable is ideal for today's EMC test applications where height is a concern and installation options may be limited.

ETS-Lindgren's Series 2181 Turntables have a long legacy of durability and trouble free operation.

ETS-Lindgren's Series 2187 Turntables are designed for applications requiring a mid-sized turntable with reasonable weight load requirements.

ETS-Lindgren Series 2188 Turntables are ideal for todays EMC test applications where height is a concern and installation options may be limited.

ETS-Lindgren's Model 3102 Conical Log Spiral is made with spiral windings of semi-rigid coaxial cable attached to the outside of a fiberglass cone.

ETS-Lindgren's 3106B Double-Ridged Guide Antenna has high gain and excellent VSWR characteristics over its entire frequency range.

ETS-Lindgren's Model 3117 Double-ridged Waveguide Horn is the latest addition to a family of double-ridged waveguide horns for microwave and EMC measurements.

ETS-Lindgren's Model 3145BDP Dual-Polarized Log-Periodic Array is a dual linearly polarized, broadband antenna designed to operate over the frequency range of 100 MHz to 1.1 GHz.

ETS-Lindgren's Model 3160 Standard Gain Horns cover a multi-octave bandwidth of 1 GHz to 40 GHz. All models in the series are linearly polarized, have medium gain, optimum half power beamwidth (equal in both horizontal and vertical planes), and low VSWR.

ETS-Lindgren's Model 3161 Octave Horn Antennas cover a bandwidth of 1 to 8 GHz.

ETS-Lindgren's Series 3163 Series Conical Horns are high gain (over 16 dBi) antennas, designed for use as feeds in tapered anechoic chambers, as well as in applications requiring high gain and linear polarization.

ETS-Lindgren's Model 3164-01 Open Boundary Quad-Ridged Horn Antenna takes the open boundary concept to its extreme by providing a totally open horn, including an open boundary feed cavity.

ETS-Lindgren's Model 3164-06 Open Boundary Quad-ridged Horn Antenna's open boundary design is similar to two double-ridged waveguide antennas orthogonally to each other.

ETS-Lindgren's 3164-08 Open Boundary Quad-Ridged Horn's open boundary design makes this antenna unique in both appearance and performance.

ETS-Lindgren's Model 3180D Broadband Mini-Bicon Antenna has been designed for optimal performance across the frequency range of 30 MHz to 1 GHz (cage elements) and 30 MHz to 3 GHz (cone elements).

ETS-Lindgren's Model 3181 Broadband Mini-Bicon Antenna is a broadband omnidirectional antenna with a radiation pattern that conforms to the CISPR-16 specifications.

ETS-Lindgren's Model 3183B is an end fed Mini-Bicon Antenna designed for CISPR 16-1-4 and ANSI C63.25 chamber validation testing above 1 GHz. The frequency range for the Model 3183B is 1 GHz to 18 GHz. Was named the 2019 EMC Product of the Year!

ETS-Lindgren's Model 3184 Broadband Mini-Bicon Antenna is a radome-protected, broadband antenna.

ETS-Lindgren's Model 3186 is a dual stacked log periodic dipole array antenna (LPDA), each of the two separate LPDAs comprising the dual array are 100 antennas. When assembled in parallel, the results are a 50 input impedance array.

ETS-Lindgren's Model 3301C Active Monopole Antenna is designed to provide reception of an electric field throughout its frequency range, in a single band, without tuning or bandswitching.

ETS-Lindgren's Model 3701 Line Probe is based on the FCC specified design for a line probe measuring conducted emissions in the frequency range of 10 kHz to 30 MHz.

ETS-Lindgren's Model 4-TR Positioner Tripod is compatible with most ETS-Lindgren antennas.

ETS-Lindgren's Model 4340 Shielded Fiber Optic HD-Camera System (CCTV) is an EMI hardened camera system or EMC chamber camera.

ETS-Lindgren's Series 5240 RF-Shielded Tabletop Test Enclosures are high performance, portable shielded enclosures designed for fast, convenient EMI/RFI testing and repair.

ETS-Lindgren's Series 5281 RF-Shielded Test Enclosures are high performance, portable shielded enclosures designed for fast, convenient EMI/RFI production testing and repair applications.

ETS-Lindgren's 5600 and 5600 HP series of RF Test Enclosures provide the most flexibility in the industry in terms of performance, applications, and connectivity making them ideal for development, production and quality assurance applications.

ETS-Lindgren's Model 7-TR Tripod is compatible with most ETS-Lindgren antennas.

ETS-Lindgren Models 7605 Radiating Loop and 7606 Sensing Loop are precision-built to the exact specifications as described in MIL-STD 461G for Method RS101.

ETS-Lindgrens Model 8000-007 RF Power Amplifier is a 1000 W power amplifier, designed primarily for commercial and military applications that include IEC/EN 61000-4-3, 30 V/m and RS103, 200 V/m requirements.

ETS-Lindgren's Model 8000-011 RF Power Amplifier is a 1000 W power amplifier, designed primarily for commercial and military applications that include IEC/EN 61000-4-3, 30 V/m and RS103, 200 V/m requirements.

ETS-Lindgrens Model 8000-031 RF Power Amplifier is a 1300W power amplifier, designed primarily for commercial and military applications that include ISO 11452-2 and RS103, 200 V/m requirements.

ETS-Lindgren's Model 8100-013 RF Power Amplifier is a 10,00W power amplifier, designed primarily for EMC applications that include MIL-STD 461 RS 103, > 200 V/m requirements.

ETS-Lindgren's Model 8100-031 RF Power Amplifier is a 60W power amplifier, designed primarily for EMC applications that include MIL-STD 461 RS 103, 50 V/m requirements.

ETS-Lindgren's Model 8100-068 RF Power Amplifier is a 9000 W Pulsed TWT power amplifier, designed primarily for EMC and general RF applications that require at least 9000 W from 2 GHz to 4 GHz.

ETS-Lindgren's Model 8100-076 RF Power Amplifier is a 120W power amplifier, designed primarily for EMC applications that include MIL-STD 461 RS 103, greater than 200 V/m requirements.

ETS-Lindgren's Model 8100-102 RF Power Amplifier is a 400 W power amplifier, designed primarily for EMC applications that include IEC 61000-4-3, > 30 V/m automotive requirements.

ETS-Lindgren understands that shielding requirements vary and all shielding applications do not require high levels of performance. ETS-Lindgren's Architectural Shielding Systems are customized to meet customer defined requirements using and assortment of shielding materials, doors and RF components to provide the ideal EMI/RFI solution to suit specific requirements.

ETS-Lindgren's Auto-Latching Door System for EMI/RFI Shielded Rooms maintain the highest level of shielding effectiveness in EMI/RFI enclosures while providing user-friendly door operation.

ETS-Lindgren Curvilinear Absorber is an advanced new RF absorber product that is optimized for broadband reflection suppression.

ETS-Lindgren's LTC Series of filters are ideal for applications including communication lines entering or leaving shielded rooms, computer rooms, communication terminal rooms, and Sensitive Compartmental Information Facilities (SCIF).

ETS-Lindgren's Custom Antenna Radome Enclosure offers a weatherproof environment for our most popular horn antennas.

ETS-Lindgren's standard modular or custom DEI screen industrial shielding enclosures provide the highest shielding performance available in a "hear-through, see-through" structure.

ETS-Lindgren's DuraSorb^TM DSH-1250H Absorber is the latest evolution of ETS-Lindgren's low profile, hybrid anechoic absorber technology.

ETS-Lindgren's DuraSorb^TM DSH-400H Absorber is the latest evolution of ETS-Lindgren's low profile, hybrid anechoic absorber technology.

ETS-Lindgren's DuraSorb^TM  DSH-600H Absorber is the latest evolution of ETS-Lindgren's low profile, hybrid anechoic absorber technology.

ETS-Lindgren's LTC Series of filters are ideal for applications including communication lines entering or leaving shielded rooms, computer rooms, communication terminal rooms, and Sensitive Compartmental Information Facilities (SCIF).

ETS-Lindgren's Double Knife Edge Door (DKE) is a heavy-duty door, constructed of exceptionally rugged materials with designed-in reinforcements to provide exceptional shielding performance.

ETS-Lindgren's Dual Line Single Phase Filters are individual, stand-alone dual circuit filters from our LRX series of power line filters.

ETS-Lindgren's type EHP (Extra High Performance) microwave absorber is designed for use over a wide frequency spectrum and has been used as an effective tool for the reduction of reflections from 30 MHz through 100 GHz.

ETS-Lindgrens EMC-20PCL is an ultra broadband absorber which has been optimized for EMC applications.

ETS-Lindgren's EMC-24PCL EMC Absorber is an ultra broadband microwave absorber which has been optimized for EMC applications.

ETS-Lindgren's Electromagnetic Interference (EMI) and Extremely Low Frequency (ELF) shielding products provides customers with standard and custom shielding solutions to meet their specific needs

ETS-Lindgren's Waveguide Air Vents are manufactured to meet a variety of customer requirements.

ETS-Lindgren EMP/HEMP Power Line Filters offer excellent multi-stage over-voltage and EMI/RFI protection.

ETS-Lindgren's Filter Foam/Vent Absorber series microwave absorber is similar in appearance and geometry to conventional ETS-Lindgren pyramidal and wedge type materials, and is tested to the same rigid specifications.

ETS-Lindgren's Flat Laminate Absorber, commonly known as lossy foam block provides moderate performance and is flexible and easy-to-cut for placement around positioners, near-field scanners, etc.

ETS-Lindgren's GigaFOIL Ethernet Filters utilize patented technology and are the only EMI/RFI filters for Ethernet on the market that offer 100 dB performance from 10 kHz to 18 GHz and higher.

ETS-Lindgren's HI-1501 Microwave Survey Meter provides accurate measurements of microwave oven radiation and portability for use by microwave oven manufacturers, service technicians, regulatory agencies and public health officials.

ETS-Lindgren High Power Microwave Absorber is fabricated from high temperature materials.

Lossy Foam Block (LFB) is a flat multi-purpose absorber that can be readily customized for shapes to cover corner areas or positioning equipment.

ETS-Lindgren's MF-9F Series of RF Leak Detector/Attenuation Meter Kits are designed to simplify the performance evaluation of shielding enclosures.

ETS-Lindgren's MIL-STD-461 chamber is designed for testing in accordance with Mil-Std 461E, Mil-Std 461F and Mil-Std-461G. The chambers shell is constructed with Series 81 modular cell-type shielding panels.

ETS-Lindgrens EHP Convoluted Absorber is designed to provide good refectivity performance with low forward scattering characteristics at incident angles up to 60 from normal incidence at microwave and millimeter-wave frequency ranges.

ETS-Lindgren's LRE Series Multiple Circuit Filters are designed for moderate filtering requirements.

ETS-Lindgren's LRX Series Filters panels are NEMA 1 type (for indoor controled environments only) with two compartments to provide the necessary isolation for secure applications. type panels for wall-mounted and floor-standing installations.

ETS-Lindgren's Model N242X Power Filters are low leakage RFI/EMI high-performance power filters, designed for use where low earth leakage is a requirement.

ETS-Lindgren's N258X High Current RFI/EMP Power Filters are designed for use on main incoming three phase and neutral supplies, carrying up to 800 Amps and 400 Amps respectively, and are ideal for use in EMPP systems and other applications.

ETS-Lindgren's One Line Single Phase Filters are individual, stand-alone single circuit filters from our LRX series of power line filters. Two single line filters are required for any basic electrical circuit, DC or single phase.

ETS-Lindgren's LTC series of filters are ideal for applications including communication lines entering or leaving shielded rooms, computer rooms, communication.

ETS-Lindgren's LPTC series panels are NEMA 1 type (for indoor controled environments only) with two compartments to provide the necessary isolation for secure applications.

Reliable, advanced pneumatic sliding door technology for EMI/RFI shielding systems

ETS-Lindgren's RFD-100 doors are designed for high performance operation up to 40 GHz. The RFD-100 is also designed to accommodate numerous options, including the addition of ferrites and absorbers.

ETS-Lindgren's RFD-60 doors are designed for easy, lightweight operation and performance and tested in accordance with IEEE-299 and MIL-STD-285.

ETS-Lindgren's RFSD-100 Sliding Doors are designed to provide the highest shielding requirements.

ETS-Lindgren's Red Edge^TM shielded enclosure provides EMP, IEMI and TEMPEST hardening for critical electrical equipment.

ETS-Lindgren's SMART^TM (Statistical Mode Averaging Reverberation Test-Site) Chambers use the latest developments in proven reverberation technology and experienced chamber design & construction to create a suitable electromagnetic environment (EME) for immunity, emissions and shielding effectiveness & testing.

ETS-Lindgren's SRFSD-100 sliding doors are designed for applications in the reverb chambers and partial discharge rooms and according to the customer's requirements.

ETS-Lindgren's Series 101 RF shielded construction system meets and substantially exceeds all RF shielding requirements. The system consists of modular, hot galvanized rigid steel structural panels.

ETS-Lindgren's Series 81 RF Shielded Enclosure uses a time-proven design for superior Radio Frequency Shielding and EMI Shielding applications.

ETS-Lindgren's Series 83 RF Shielded Enclosures are custom shielding option for specialized applications such as electron microscopes and physiological studies.

ETS-Lindgren's LTC Series are ideal for applications including EMC testing, communication lines entering or leaving shielded rooms, computer rooms, communication terminal rooms, and Sensitive Compartmental Information Facilities (SCIF).

ETS-Lindgren's LRW Series Single & Dual Line Filters are UL Listed and come with mounting penetration and hardware for direct installation through a shielded wall.

ETS-Lindgren's Single Knife Edge (SKE) Door with the Semi-Automatic Electro-Latch offers superior knife edge door reliability, performance and longevity

ETS-Lindgren's Single Knife Edge (SKE) Door offers superior knife edge door reliability, performance and longevity.

ETS-Lindgren's Specialty Filters are ideal for applications including communication lines entering or leaving shielded rooms, computer rooms, communication terminal rooms, and Sensitive Compartmental Information Facilities (SCIF).

ETS-Lindgren's LTC series of telephone line data filters are ideal for applications including communication lines entering or leaving shielded rooms, computer rooms, communication terminal rooms, and Sensitive Compartmental Information Facilities (SCIF).

ETS-Lindgren's LTC Series of filters are ideal for applications including EMC testing, communication lines entering or leaving shielded rooms, computer rooms, communication terminal rooms, and Sensitive Compartmental Information Facilities (SCIF).

ETS-Lindgren's Extra High Performance Walkway Absorber is a special absorbent material that is compatible with anechoic chamber reflection requirements, yet provides a walking surface for personnel.

ETS-Lindgren's Waveguide Feed-throughs are available in most sizes for water, gas, or air.

ETS-Lindgren's Waveguide Filters are designed to provide a means of bringing fiber optic cables into a shielded enclosure while maintaining the enclosure's radio frequency isolation integrity.

ETS-Lindgren's Wedge Absorber effectively reduces reflections between 30 MHz and 100 GHz and its RF reflectivity levels are the same as its equivalent sized pyramid absorber. Wedge absorbers are used in areas of chambers where pyramid absorbers would provide too much backscatter under specific configurations.

ETS-Lindgren's Welded Enclosures combine the welded fabrication concept with full-service capabilities ranging from initial consultation, design, engineering, and fabrication to final installation and testing certification to provide maximum shielding effectiveness over many years of service.