Jump to content

Software / Addons / Waypoints

Sign in to follow this  

42 files

       (0 reviews)

    0 comments

    Updated

  1. Ets Silent Folder

    This silent folder contains everything needed to play on the Ets Main silent server*
    *except maps and seasonal theme packs.
    The silent client binaries are also included, select your platform when you download.
    Install the silent folder into the root of your Enemy Territory Installation, or into the root of your et data directory. (.etwolf)

    19 downloads

       (1 review)

    0 comments

    Updated

  2. Auto-Optimize ET Settings

    Auto-Optimize ET Settings
    Purpose: Automatically sets the optimized settings for ET.
    Settings changed when using this pk3:
    seta com_hunkmegs 256
    seta com_soundmegs 64
    seta com_zonemegs 48
    seta com_maxfps 125
    seta cl_maxpackets 100
    seta rate 56000
    seta snaps 40
    These settings will optimize your ET Gameplay while also preventing the hunk_alloc errors.
    // Installation //
    Cut and paste the PK3 included in this .zip into your "etmain" directory.
    Note: you will need to launch the game and then restart the game after installing this PK3 for the new settings to take effect.

    21 downloads

       (0 reviews)

    0 comments

    Submitted

  3. qtracker

    Qtracker Information Easy, One-Click Connecting You're always one click away from playing. Once you've found a server to play on, just click connect and your game will load and automatically connect to the server, so there's no need to remember ip addresses. The Auto-Login feature can even log you in and pick your soldier for games like Battlefield 2142.

    If a server is full, Qtracker can automatically connect you as soon as a position is available!   Players, Rules, Mapshots, and Administration View players, scores, teams, rules, and all other types of server details from one convenient window. Player names are rendered using in-game fonts to support fun-names and colors. Installable Mapshot Packs let you see images of the active map, and are available for most games and modifications.
        Using the Administration tab you can execute server commands remotely and see the results. You can even see formatted player conversations, deaths, and other log events on Half-Life 1 and Half-Life 2 engine games.
        Region Filtering Don't waste time querying servers you'll never play on. Over 400 regions are included with flag icons, covering all of the continents and most countries/states.
        Server Filtering Advanced filters allow you to see only the servers you want to. Many filters are available for download for most games and modifications, but it's easy to create your own filters with just a few clicks.   Themes Express your individuality using Windows Theme (.msstyles) files. Thousands of Themes are freely available on the Internet from websites such as deviantART and SkinBase.org.
        Panes Panes allow you to arrange the interface to meet your needs. Panes can be moved, hidden, and inserted or tabbed into other panes. Auto-hide pins permit panes to conveniently collapse away when not in use, but will re-appear when you hover over them. If you've ever played a multiplayer game on your PC, the in-game server browser has probably left you wanting more. Qtracker lets you say goodbye to the in-game browser, forever!

    From the convenience of one program you can manage all of the games you play, whether they're on the Internet or your LAN, without ever having to load a game. Find your friends, find new servers, watch games in progress, administer servers, and tons more.

    Qtracker supports over 100 of the most popular multiplayer games, and is actively supported with regular updates. Complete listing of supported games.
     

    9 downloads

       (0 reviews)

    0 comments

    Updated

  4. Repo OB

    a program to can update the  waypoints
    Tortoise has to be installed

    2 downloads

       (0 reviews)

    0 comments

    Updated

  5. Wolfadmin-v120

    sources : https://www.thewolfteam.org/blogs/entry/15-wolfadmin-120-released/
    https://dev.timosmit.com/wolfadmin/download.html
    After over two years of development, it is finally time to release a new version of WolfAdmin. As always, you can find the new version on the website.

    This version can be marked as the largest update to WolfAdmin so far. From now on, you can completely replace the shrubbot administration system with WolfAdmin using standalone mode. Say goodbye to limited amount of levels, admins, mutes and bans, and give a warm welcome to SQL-based databases to store your players and their permissions.

    Most of the features that mods like NoQuarter and ETPub provide should have been ported to WolfAdmin. This includes the commands, but also chat logging and private messaging.

    Furthermore, the directory structure has been reworked to ease updates and to make sure that all operating systems can run WolfAdmin. In addition to this, the well-known .cfg files have been replaced by .toml files to ease configuration.

    Finally, I am very proud to announce that WolfAdmin is now shipped by default with ET: Legacy. This means that anyone who uses the Legacy mod (and any future mods derived from it) will automatically benefit from WolfAdmin. This is a huge step in promoting WolfAdmin for new server administrators and I would like to give them a warm welcome.

    In case you encounter a bug or want to share anything else that might be interesting, please use the official bug tracker. Besides that you can also monitor the continuous development in the GitHub repository.
    WolfAdmin is a Lua module for Wolfenstein: Enemy Territory servers created by Timo 'Timothy' Smit. It is an enhancement of the existing game, mod and shrubbot functionalities, providing you with extra tools to administrate your server.
    Among the features are advanced logging of player data, a new set of commands your administrators may use and a new set of custom voting options. Finally the module also provides some functionality which was originally provided by popular mods and makes them available on all mods.
    Publiée 2019-01-04  0000073: [Setup & Configuration] Create install script (Timo)    0000060: [Setup & Configuration] Add TOML support (Timo)    0000061: [General] Standalone mode (Timo)          0000062: [Commands] Provide basic admin commands (Timo)          0000069: [General] Provide alternative to shrubbot (Timo)          0000055: [Database] Store mutes, kicks, warns and bans in the database (Timo)    0000074: [General] Improve portability (Timo)    0000078: [General] Improve error handling (Timo)    0000075: [General] Improve code efficiency (Timo)    0000083: [General] Add setting to disable unknown GUID kick (Timo)    0000080: [General] Configs are not loaded (Timo)    0000077: [Commands] Bot difficulty options (Timo)    0000066: [Commands] console: prefix on command output (Timo)    0000065: [Commands] Fix logging (Timo)    0000064: [Commands] !stats not displaying on Legacy (Timo)    0000071: [General] Load modules independent from path (Timo)    0000072: [General] Improve directory structure (Timo)    0000048: [General] Compatibility with Lua 5.3 (Timo)  
    Features
    On this page you find an overview of WolfAdmin's features and how to use them.
    Table of contents Installation modes added in 1.2.0 Access control lists standalone added in 1.2.0 Commands Chat Information commands Player commands Team commands Match commands Voting commands Bot commands Server commands Console Server Voting New options Restrictions Menu Support & bugs
    In case you run into trouble and need support for WolfAdmin, check out the #wolfadmin IRC channel on Quakenet. You may also contact me via mail or via one of the communities where I usually hang around.
    For bug reports or feature requests, please use the bug tracker.
    Installation modes changed in 1.2.0
    WolfAdmin can be installed both as a standalone game manager (default with ET: Legacy) as well as being an add-on to existing mod functionality (such as ETPub or NoQuarter).
    When used as a standalone game manager, WolfAdmin will take care of all your needs as an administrator. It provides you with fine-grained acccess control for players and administrators, as well as many different settings to enable or disable features.
    Older modifications already have an administration system in place, called shrubbot. This system can be disabled if you want to make use of all of WolfAdmin's features. To do so, check the relevant section on the setup page. If you want to run WolfAdmin alongside shrubbot, you do not have to change any configuration at all, since the module is able to detect this automatically.
    Because some functionality is only available in standalone mode (and some only in add-on mode), blue labels are added in the documentation for the sake of readability. standalone and add-on denote functionality that is available in standalone mode and add-on mode, respectively.
    Access control lists standalone added in 1.2.0
    WolfAdmin comes with its own authorization system. Rather than editing a configuration file, all levels and administrators are stored in a database in so-called access control lists (ACLs). Each command or feature is associated to a permission (e.g. !help requires the permission help) rather than a shrubbot flag. ACLs are basically feature permissions grouped together in a list (level).
    Anyone with access to the acl command is able to read and modify the ACLs that are available on a server, for example to create new permissions (for custom features) or to add/remove permissions from a certain level.
    For more information on configuring ACLs, see the relevant section on the configuration page.
    Commands
    To control most of WolfAdmin's features on the fly, you can execute commands in-game or from the server. Below you can find a list of default commands. Server owners are also able to install more commands written in Lua.
    Client console
    The following commands can only be executed through a client's console.
    /wolfadmin
    display information about WolfAdmin
    syntax: /about
    flag: (none)
    /pm or /m legacy added in 1.2.0
    write someone a private message
    syntax: /pm [name|slot #] [message]
    flag: (none)
    /r added in 1.0.1
    reply to a private message
    syntax: /r [message]
    flag: (none)
    /adminchat or /ac
    send a message to all admins online (players who can use admin chat)
    syntax: /adminchat [message]
    flag: ~
    Chat
    The following commands can be executed in the chat or through a client's console, using /!command syntax. Note that for the latter to work, you may need additional permissions granted by server administrators.
    Information commands
    !help
    display commands available to you or help on a specific command
    syntax: !help (command)
    flag: h
    permission: help
    !admintest standalone
    display your current admin level
    syntax: !admintest
    flag: a
    permission: admintest
    !greeting
    display your personal greeting, if you have one
    syntax: !greeting
    flag: Q
    permission: greeting
    !rules
    display the rules on the server
    syntax: !rules (rule)
    flag: C
    permission: listrules
    !stats
    display the statistics for a specific player
    syntax: !stats [name|slot #]
    flag: I
    permission: liststats
    !sprees
    display the current spree records
    syntax: !sprees
    flag: I
    permission: listsprees
    !listmaps
    display the maps in the rotation
    syntax: !listmaps
    flag: I
    permission: listmaps
    !time
    displays the local time
    syntax: !time
    flag: C
    permission: time
    Player commands
    !listplayers standalone
    display a list of connected players, their slot numbers as well as their admin levels
    syntax: !listplayers
    flag: i
    permission: listplayers
    !finger standalone
    gives specific information about a player
    syntax: !finger [name|slot #]
    flag: f
    permission: finger
    !listaliases
    display all known aliases for a player
    syntax: !listaliases [name|slot #] (offset)
    flag: f
    permission: listaliases
    !listlevels removed in 1.2.0
    list a player's level history
    syntax: !listlevels [name|slot #] (offset)
    flag: s
    !showwarns removed in 1.2.0
    display warnings for a specific player
    syntax: !showwarns [name|slot #] (offset)
    flag: R
    permission:
    !showhistory added in 1.2.0
    display history for a specific player
    syntax: !showhistory [name|slot #] (offset)
    flag: f
    permission:
    !dewarn removed 1.2.0
    remove a warning for a certain player
    syntax: !dewarn [name|slot #] [warn #]
    flag: R
    !showbans standalone
    display a (partial) list of active bans
    syntax: !showbans (start at ban#) ((banner) (banner's name)) ((find) (banned player)) ((reason) (reason for ban))
    flag: B
    permission: listbans
    !warn standalone
    warns a player by displaying the reason
    syntax: !warn [name|slot #] (reason)
    flag: R
    permission: warn
    !put standalone
    locks a player to a specific team
    syntax: !put [name|slot #]
    flag: p
    permission: put
    !mute standalone
    mutes a player (text and voice chat)
    syntax: !mute [name|slot #]
    flag: m
    permission: mute
    !unmute standalone
    unmutes a player (text and voice chat)
    syntax: !unmute [name|slot #]
    flag: m
    permission: mute
    !vmute
    mutes a player (voice chat only)
    syntax: !vmute [name|slot #]
    flag: m
    permission: mute
    !vunmute
    unmutes a player (voice chat only)
    syntax: !vunmute [name|slot #]
    flag: m
    permission: mute
    !plock
    locks a player to a specific team
    syntax: !plock [name|slot #]
    flag: K
    permission: lockplayer
    !punlock
    unlocks a player
    syntax: !punlock [name|slot #]
    flag: K
    permission: lockplayer
    !kick standalone
    kick a player with an optional reason
    syntax: !kick [name|slot#] (reason)
    flag: k
    permission: kick
    !ban standalone
    ban a player with an optional duration and reason
    syntax: !ban [name|slot#] (duration) (reason)
    flag: b
    permission: ban
    !unban standalone
    unbans a player specified ban number as seen in !showbans
    syntax: !ban [ban#]
    flag: b
    permission: ban
    !slap standalone
    give a player a specified amount of damage for a specified reason
    syntax: !slap [name|slot#] (damage) (reason)
    flag: A
    permission: slap
    !gib standalone
    instantly gibs a player
    syntax: !gib [name|slot#]
    flag: g
    permission: gib
    !setlevel standalone
    sets the admin level of a player
    syntax: !setlevel [name|slot#] [level]
    flag: s
    permission: setlevel
    !incognito
    fakes your level to guest (no aka)
    syntax: !incognito
    flag: s
    permission: incognito
    Team commands
    !balance
    either asks the players to even up or evens them by moving or shuffling players
    syntax: !balance (enable|disable|force) added in 1.1.0
    syntax: !balance (force) 1.0.0-1.1.0
    flag: p
    permission: balance
    !lock standalone
    lock one or all of the teams from players joining
    syntax: !lock [r|b|s|all]
    flag: L
    permission: lockteam
    !unlock standalone
    unlock one or all locked teams
    syntax: !unlock [r|b|s|all]
    flag: L
    permission: lockteam
    !shuffle standalone
    shuffle the teams by XP to try and even them
    syntax: !shuffle
    flag: S
    permission: shuffle
    !shufflesr standalone legacy
    shuffle the teams by Skill Rating to try and even them
    syntax: !shufflesr
    flag: S
    permission: shuffle
    !spec999 standalone
    moves 999 pingers to the spectator team
    syntax: !spec999
    flag: P
    permission: spec999
    !swap standalone
    swap teams
    syntax: !swap
    flag: w
    permission: swap
    Match commands
    !cointoss standalone
    flips a coin
    syntax: !cointoss
    flag: q
    permission: cointoss
    !nextmap standalone
    loads the next map
    syntax: !nextmap
    flag: n
    permission: nextmap
    !pause standalone
    pauses the game for all players
    syntax: !pause
    flag: Z
    permission: pause
    !unpause standalone
    unpauses the game for all players
    syntax: !unpause
    flag: Z
    permission: pause
    !reset standalone
    resets the current match
    syntax: !reset
    flag: r
    permission: 

    25 downloads

       (1 review)

    0 comments

    Updated

  6. decompilateur_v1-1-3

    for mappers sources : https://wolffiles.de/index.php?Oldwolfmapnewslist

        Decompilateur
    I] Mentions Légales
    CE LOGICIEL EST FOURNI "EN L'ETAT" SANS GARANTIE D'AUCUNE SORTE, QU'ELLE SOIT IMPLICITE OU EXPLICITE, Y COMPRIS LES GARANTIES D'APTITUDE A UN TYPE D'UTILISATION.
    EN AUCUN CAS, CIDELCORP NE SERA TENU RESPONSABLE POUR TOUT DOMMAGE SPECIAL, ACCIDENTEL OU INDIRECT DECOULANT DE LA POSSESSION, DE L'UTILISATION OU DU DYSFONCTIONNEMENT DE CE LOGICIEL CIDELCORP.
    CIDELCORP SE RESERVE LE DROIT DE PROCEDER A DES AMELIORATIONS SUR CE FICHIER ET SUR CE LOGICIEL A TOUT MOMENT ET SANS PREAVIS.

    II] Changelog
    version 1.1.2
        Ajout d'un nouveau système de sélection de jeu (l'ancien ne permettais pas de choisir facilement son jeu)
        Correction d'un bug provoquant l'arret du programme lors de la decompression des textures
        Correction d'un bug de casse pour quake 3
        Ajout du système de statistiques anonymes cidelcorp ( Nom complet de l'os, version du programme, date de la decompilation)
    version 1.1.1
        Correction d'un bug
        Modification du texte copié dans le presse papier lors de crashs.
    version 1.1.0
        Ajout d'une meilleure mise en evidence des problèmes de la compilation
        Ajout du support des textures pour les 3 jeux supportés (Wolf:ET,RTCW,Quake3)
        Ajout de la reconnaissance d'une erreur d'accès d'écriture au fichier de sauvegarde
        Correction d'un bug qui provoquait lors des 2nd, 3emes ... compilations une impossibilité de sauvegarder le .map sous un nom different que "converted_mapname.map"
        Ajout de ce fichier (README)
    III] Support
    Manuel en ligne :
       http://decompilateur.cidelcorp.fr
    Forums de support :
       http://forums.cidelcorp.fr
    E-Mail :
        cidelcreateur@hotmail.fr

    IV] Remerciements
        Je tiens a remercier toute l'equipe de Cidelcorp et notemment le petit dernier, j'ai nommé cubix999.
        Je tiens aussi a remercier www.enemyterritory.fr pour la news qu'ils ont postés lors de la sortie de ce logiciel.
        Merci aussi à tous ceux qui m'entourrent de leur amour et de leur gentillesse.
        Merci spécial à mon père : "Oui, j'y ai cru ..."

    7 downloads

       (0 reviews)

    0 comments

    Submitted

  7. Notepad++ 7.5.9

    http://docs.notepad-plus-plus.org/index.php/Main_Page
    https://notepad-plus-plus.org/download/v7.5.9.html
    Notepad++ v7.5.9 bug-fixes and enhancements:
    Fix hanging problem while switching back a fully-folded document by using shortcut (Ctrl-TAB). Fix possible file corruption during backup or power loss or other abnormal N++ termination. Fix wrong backup file deleted issue. Fix backup not fully disabled issue. Add 2 command line flags "-notepadStyleCmdline" and "-z" for the replacement of notepad.exe.
    See https://notepad-plus-plus.org/features/replace-notepad.html Add new plugin API NPPM_REMOVESHORTCUTBYCMDID to allows plugins to remove unneeded shortcuts. Fix Tail monitoring incoherent status after deleting a monitored file. Fix issue with wrong smart highlighting when it is disabled. Fix last active tab is ignored on Notepad++ restart issue. Fix Tab non-responding by mouse click after dragging bug. Fix switching back position restoring issue for wrapped document. Add several spiritual quotes and a subtle Easter egg in the source code.

    6 downloads

       (0 reviews)

    0 comments

    Updated

  8. z_hunk

    from Kemon @discord
    kemonToday at 10:25 AM@Kate I just tested and it actually works.
    Definitely when it's downloaded into etmain. For mod folders it works only if that folder is the default one in the client game
    tested with my local host:
    w/o the  z_hunk  i have : seta com_hunkMegs "56" 
    with the z_hunk : is modified to  seta com_hunkMegs "192" 
     

    11 downloads

       (0 reviews)

    1 comment

    Updated

  9. zzz_50_knifes

    50 knifes pack made by ETc|#.Jay.#
    Serverside modification.
    You can use a pk3 file or a lua file.

    Using the pk3:
    Put the zzz_50knifes.pk3 file in your servers "nitmod" folder 
    and use standart g_weaponscriptsdir.
    this should be in your nitmod.cfg
    set g_weaponScriptsDir ""

    Using the lua.
    put the knife.lua in your servers nitmod folder.
    add in your nitmod.cfg:
    set lua_modules "knife.lua"
    if you want to load more lua modules, use:
    set lua_modules "knife.lua yourotherlua.lua yourotherlua.lua and.lua and.lua and.lua"
     
    Both ways tested with nitmod only, the lua should work on every mod, if the weapon id is the same. in nitmod it is:     
    1         WP_KNIFE
     
     
     
     

    6 downloads

       (0 reviews)

    0 comments

    Updated

  10. BSP for mappers

    INSTALLATION NOTES
    ==================
    BSP 0.96b - 7/10/2007

    Note: If no games show up in the Choose Game dialog, or if you see the error message 
    "Couldn't find [c:\BSP\quake2\game.cfg], quitting...", it means BSP did not find a 
    game.cfg file in any of its subdirectories. For example, if BSP is installed to 
    C:\BSP, for Quake editing there should exist a file C:\BSP\Quake\game.cfg. Re-install 
    BSP to restore the default files.
    Note: "Setup.exe" has been removed from this version of BSP. This program was
    a GUI front end to editing game.ini files. Since game.ini file formats have
    changed, "setup.exe" is no longer valid. To configure games without "setup.exe",
    find Game.cfg in the subdirectory of the game you wish to edit, and edit it in
    a text editor. See Directory Configuration below.

    Install Games to Edit
    =====================
    First, you should have any games you are editing for installed on your system. BSP 
    utilizes the .pak files and game data from games to display models and textures. 
    For Quake 1 engine games, BSP loads their textures through .wad files. These .wad 
    files are not included with the game, but textures from the game can be extracted 
    into .wad files. More textures can be found on the internet (try 
    http://quaddicted.com/wads, or http://bspquakeeditor.com/downloads.php). A small 
    .wad file containing a few textures from Q1 is included in the quake\maps 
    directory.
    BSP uses batch files to build map files into .bsp files to play in games. These 
    batch files, that can  be found in the game directories, may need to be modified 
    to have the directories point to the right locations. For information on setting 
    up batch files for compiling and running maps, see the Export to *.bsp (BSP.chm) 
    section.

    Installing BSP
    ==============
    New install: 
    -----------
    Just run the setup utility and choose a destination folder to extract to.
    Upgrade install:
    ---------------
    It is highly recommended to install BSP .96 to a fresh directory! With BSP .96, a 
    utility is included to upgrade config files. Please refer to bspupd96.txt for 
    instructions on the upgrade install.

    Directory Configuration
    =======================
    From within BSP, game settings can be edited by going to the Game section of the 
    options, or by clicking File->Preferences->Game/Directories... menu. After 
    configuring game options, click the Write Game.cfg file button and restart BSP.
    For information on individual game options, see Game Configuration (BSP.chm).
    Note!  Game setup can be simplified a lot by having the games installed to their 
    default locations. When this is the case, there is very little need to change the 
    config file and it will usually "just work".
    Example default game install locations:
    C:\Quake
    C:\Quake2
    C:\Paintball2

    5 downloads

       (0 reviews)

    0 comments

    Submitted

  11. ETPRO.exe + ET.exe

    ET (Enemy territory) has been messed up lately with master list redirect and hacking issues. In order to stop it, please download the ET.exe and replace your current one. Patch is for all ET players playing from Windows OS.

    Steps - 
    1. Download the 2 file ET.exe and ETPRO.exe. 
    2. Replace the ET.exe with the downloaded ET.exe.
    3. Use ET.exe to play on all mods except ETPro. For playing on ETPro mod, use ETPRO.exe.
     
    Please share this file to all your friends and ask them to patch their ET with this one. Please report on forums for any issues, if any.
     
    Note - New patch will also stop players redirecting from fake ET redirect servers. It's about time we focus towards good gaming experience for all new ET players. 
    Note 2 - If any new issues, we might try to fix that as well or revert back or provide complete new patch. So please subscribe to this file download. If file gets updated you will get notification, so you can stay up to date.
     
    IMP Note - Please don't download the file from other sites or source, as some may try to inject virus/trojans and spread the copy of it. I take full responsibility of this file on our website and 100% guarantee it doesn't have any back-doors. So my humble request - please be careful i.e. from where you download the files and what servers you play  on. 
     
    Update - Patch has issues with ETPro and hence use ETPRO.exe to play on ETPro mod servers.  
     
    PS Long live ET where we have made some life long best friends. ET for next 50 years till it becomes legacy like super Mario 
    sources Discord

    10 downloads

       (0 reviews)

    0 comments

    Updated

  12. 0.7.4 (windows and linux)

    == Credits & Notes ==
    ET 3.00 is currently developed by Pauluzz
    Credits for tracking integration go out to morsik. Special thanks for support to Solchanel.
    The development is still very active, and so it can happen that there will be regular updates.
    Please check for updates once in a while to see if there is anything that concerns you!
    Latest version: 0.7.4 (23-5-2015) • Download
    Download for Linux Download for Windows *You can rename the files to anything you like if needed! == Instructions ==
    Default the game runs on 2.60b protocol 84 while accepting also legacy 2.55 clients.
    For statistics tracking, be sure to unblock port 4444 UDP outgoing. • Startup Line Options
    - You can list the server in both masterlites (2.55/2.60b) if you add +set net_port_extra at the startup line. Both client version can connect on both ports. +set net_port_extra PORTNUM - The server has auto update for new versions, if you do not want this put +set sv_autoUpdate 0 IN YOUR SERVER STARTUP LINE. This can not be changed during runtime. +set sv_autoUpdate 0 • Runtime/General Options
    - You can enable protocol checking with (default is off/0) set sv_protocolcheck "1" - You can set the default protocol with (default is 84; possible options: 82/84) - this will also determine which clients can connect if sv_protocolcheck is enabled. set sv_protocol "84" - You can allow/disallow users with sv_allownoguid and edit the kick message with sv_guidkickmsg (default ALL people are allowed to connect/this is RECOMMENDED as many people DO NOT play with guids anymore) set sv_allownoguid "1" // 1 ENABLES IT, DEFAULT = 0, RECOMMEND LEAVING IT AT 0
    set sv_guidkickmsg "You have been kicked because you do not have a valid GUID. - You can enable the chat relay by setting: set sv_chatRelay "1" // 1 ENABLES IT, DEFAULT = 0 • RCON Tools
    - You can enable the rcon filtering by set sv_rconfilter "1" set the sv_rcon1 up to sv_rcon5 to whitelist rcon ip's while using sv_rconfilter "1" you can also use a * here to specify a range like 9.8.2.* • Network Options
    - You can enable the rrdoss protection with (default: 0, put it on 1 to enable) set sv_maxGetstatusCheck "1" - You can change the reflective ddos tresshold by changing set sv_maxGetstatusPerMinute "A_VALUE" - You can auto add ddossing IP's in iptables with setting set sv_maxGetstatusBeforeIPTABLES "1200" Any value above 0 will be the max packets per minute a host can send before it gets in, with a typical rddos you would get ~1200 packets per minute. IT IS NOT, I REPEAT, NOT RECOMMENDED TO PUT THIS VALUE ANY LOWER, DOING SO CAN CAUSE YOU AND/OR YOUR PLAYERS TO BE UNABLE TO REACH YOUR SERVER • Notes
    - ET 3.00 works with NoQuarter but does not let multi-protocol clients join, keep that in mind! == Changelog ==
    Version (released) 0.7.4
    - Fixed abuse for authserver, this is now disabled by default.

    Version (released) 0.7.3
    - Anti-Flood logging
    - Improved memory usage/speed of anti-flood filter

    Version (released) 0.7.2
    - q3boom exploit fix

    Version (released) 0.7.1
    - Possible fix for silent guid error - Chat Relay is now fully functional (default disabled, set sv_chatRelay 1 to enable
    - TB functions, on 0.7.1 servers type tb_help to see available commands

    Version (released) 0.7.0
    - Stats Tracking fixed for windows servers
    - Chat Relay for server admins (default disabled, set sv_chatRelay 1 to enable
    - Several Optimizations

    Version (released) 0.6.7
    - Jaymod fix with guidkick

    Version (released) 0.6.5
    - Fixed NQ compatibility
    - Fixed bug introduced in 0.5.2 (not likely to happen, but updating is recommended)

    Version (released) 0.6.4
    - Fix for getstatus rddos protection

    Version (released) 0.6.3
    - Fixed security bug that could let the server crash
    - Players without any guid should be able to play on enhancedmod servers now as well

    9 downloads

       (0 reviews)

    1 comment

    Updated

  13. ETColoredNames&VoiceManual

    RS ET COLORED NAMES & VOICE MANUAL
    RS ET COLORED NAMES & VOICE MANUAL © 2003 by Rob Sanders. All Rights reserved.
     
     
    CONTENTS
    1. COLORED NAMES.
    2. VOICE BINDS.
    3. QUICK APPENDIX.

    26 downloads

       (0 reviews)

    0 comments

    Updated

  14. Enemy Territory

    Enemy Territory Full Version Windows 2.60b with final patch included.
    IMPORTANT - Please Read!
    For all new installations:
    1. Find your etmain/profile folder,
        example : C:\Programs Files\Wolfenstein - Enemy Territory\etmain\profiles\[your nickname]
    2. Open file "etconfig.cfg" in notepad.
    3. Search for "hunkmegs"
    (When you install new ET, it is at line 56)
    4. Change it to 128 or 256 if you have a newer pc. (56 is not enough for custom maps!)

     

    36 downloads

       (0 reviews)

    0 comments

    Updated

  15. mb_utility_windowsimagetool

    to can inject usbv driver for an  OS DVD installation
     
     

    122 downloads

       (0 reviews)

    0 comments

    Updated

  16. maps waypoints

    for servers admins
     

    97 downloads

       (1 review)

    0 comments

    Updated

  17. Fraps

    http://www.fraps.com/
    Fraps is a universal Windows application that can be used with games using DirectX or OpenGL graphic technology.  In its current form Fraps performs many tasks and can best be described as:
    Benchmarking Software - Show how many Frames Per Second (FPS) you are getting in a corner of your screen.  Perform custom benchmarks and measure the frame rate between any two points.  Save the statistics out to disk and use them for your own reviews and applications.
    Screen Capture Software - Take a screenshot with the press of a key!  There's no need to paste into a paint program every time you want a new shot.  Your screen captures are automatically named and timestamped.
    Realtime Video Capture Software - Have you ever wanted to record video while playing your favourite game?  Come join the Machinima revolution!  Throw away the VCR, forget about using a DV cam, game recording has never been this easy!  Fraps can capture audio and video up to 7680x4800 with custom frame rates from 1 to 120 frames per second!
    All movies are recorded in outstanding quality.  If you have Windows Media Player please sample some of the movies captured with Fraps below:
    Fraps 3.5.99
    for Windows XP, 2003, Vista, and Windows 7 Requires Administrator rights


      Supports all modern CPUs 
    (Pentium 4 and above with SSE2)


      Captures fastest with an NVIDIA GeForce or AMD Radeon graphics card  
     

    11 downloads

       (0 reviews)

    1 comment

    Updated

  18. ET260_mac + ET260 + ET255

    dont sure it is still working
    This is a modified ET.exe file,
    The master server address has been changed from etmaster.idsoftware.com to masterser0.etmaster.net.
    A new master server has been setup et etmaster.net, to get your server on the list, or for more information, 
    please visit http://etmaster.net/

    14 downloads

       (0 reviews)

    0 comments

    Updated

  19. Patch Selector for Enemy Territory Patch 2.60b

    Patch Selector for Enemy Territory Patch 2.60b
    This is the original patch selector for Enemy Territory, edited to support ET patch 2.60b.
    KillerWhale 
    email: KillerWhaleMail@hotmail.com
    Original author:
    name: rob
    email: zeo_max@lycos.de
    ------------------------------------------------------------------------------------------
    English Readme originally by >- NO_r_WAY -< (edited by KillerWhale).
    !!! Before you use this Patch Selector you must install Enemy Territory Patch 2.60 !!!
    1)  Unzip the the files: 
    "100.patch","102.patch", "260.patch", "ETDED260.patch", "260b.patch", "ETDEDb.patch", "100.bat", "102.bat" and "260.bat"
    to your "Enemy Territory" folder (where the ET.exe is).
    2) Unzip the files: "mp_bin.100", "mp_bin.102" and "mp_bin.260" to your /etmain/ folder.
    ------------------------------------------------------------------------------------------
    Deutsche Readme. (edited by KillerWhale)
    (From the original readme file)
    Bevor du diesen switcher benutzt musst du unbedingt den Patch 2.60 instalieren!!!

    1) Entpacke die sechs Dateien "100.patch","102.patch", "260.patch", "ETDED260.patch", "100.bat", "102.bat" und "260.bat" ins "Enemy Territory" Verzeichnis (also da wo die ET.exe drin ist). Die drei Dateien "mp_bin.100", "mp_bin.102" und "mp_bin.260" enpackst du ins etmain Verzeichnis.
    2) So das wars :-). Mit einem Doppelklick auf "100.bat" wird ET in die Version 1.00 geändert. Mit ein Doppelklick auf "102.bat" wird ET in die Version 1.02 geändert. Und ein Doppelklick auf "260.bat" macht aus dem Spiel wieder die Version 2.60.

    13 downloads

       (0 reviews)

    0 comments

    Submitted

  20. ETKeyGen

    ETKeyGen (c) StoerFaktoR
    Install and Start ETKeyGen
    Just simply click on "Generate" then "Save to custom directory"
    Choose your directory
    Enter "etkey" as filename and save your etkey
    !!!DO NOT OVERWRITE EXISTING ETKEYS!!!
    url:http://chris-s.de
    mail : mini@chris-s.de

    12 downloads

       (0 reviews)

    0 comments

    Submitted

  21. zz_des_hween

    small halloween skin

    17 downloads

       (0 reviews)

    0 comments

    Submitted

  22. GTKRadiant_165_all_OS

    source: Splatterladder http://et.splatterladder.com/
    The open source, cross platform level editor for id Tech games.
    GtkRadiant is the official level design toolchain for games powered by id Tech engines from id Software,
    and is maintained by a community of volunteers. GtkRadiant is powered by the GTK+ Project and released under a GPL license.
     
     

     
     
     

    13 downloads

       (0 reviews)

    0 comments

    Updated

  23. ACW 309 Mo

    Hi man !
    Just :
    add to the enemy territory shortcut this line
     + exec server.cfg + set com_hunkMegs 512
     
     + exec server.cfg = for use all acw parameters
     
    + set com_hunkMegs 512 = because the maps are too big
     
    Well u have now this shortcut
    "acw"\et.exe" + exec server.cfg + set com_hunkMegs 512
    Creat a profil if u need
    Good game my partner, PAV.
     
    add the ACW 309 MO in the et main folder
    http://bobots.e-monsite.com/pages/projet-bobots/download-bobot.html

    28 downloads

       (0 reviews)

    0 comments

    Updated

  24. php-7.0.5

    [IMPORTANT NOTICE]
    ------------------
     Failed tests usually indicate a problem with your local system setup
    and not within PHP itself (at least for official PHP release versions).
    You may decide to automatically submit a test summary to our QA workflow
    at the end of a test run.
     Please do *not* submit a failed test as a bug or ask for help on why
    it failed on your system without providing substantial backup information
    on *why* the test failed on your special setup. Thank you :-)

    [Testing Basics] 
    ----------------
     The easiest way to test your PHP build is to run "make test" from the
    command line after successfully compiling. This will run the complete
    tests for all enabled functionalities and extensions using the PHP
    CLI binary.
     To execute test scripts, you must build PHP with some SAPI, then you
    type "make test" to execute all or some test scripts saved under
    "tests" directory under source root directory.
    Usage:
    make test
     "make test" basically executes "run-tests.php" script
    under the source root (parallel builds will not work). Therefore you
    can execute the script as follows:
    TEST_PHP_EXECUTABLE=sapi/cli/php \
    sapi/cli/php [-c /path/to/php.ini] run-tests.php [ext/foo/tests/GLOB]

    [Which "php" executable "make test" look for]
    ---------------------------------------------
    If you are running the run-tests.php script from the command line (as above)
    you must set the TEST_PHP_EXECUTABLE environment variable to explicitly
    select the PHP executable that is to be tested, that is, used to run the test scripts.
    If you run the tests using make test, the PHP CLI and CGI executables are 
    automatically set for you. "make test" executes "run-tests.php" script with the CLI binary.  Some
    test scripts such as session must be executed by CGI SAPI. Therefore,
    you must build PHP with CGI SAPI to perform all tests.
    NOTE: PHP binary executing "run-tests.php" and php binary used for
    executing test scripts may differ. If you use different PHP binary for
    executing "run-tests.php" script, you may get errors.

    [Which php.ini is used]
    -----------------------
     "make test" uses the same php.ini file as it would once installed.
    The tests have been written to be independent of that php.ini file,
    so if you find a test that is affected by a setting, please report
    this, so we can address the issue.

    [Which test scripts are executed]
    ---------------------------------
     "run-tests.php" ("make test"), without any arguments executes all
    test scripts by extracting all directories named "tests"
    from the source root and any subdirectories below. If there are files,
    which have a "phpt" extension, "run-tests.php" looks at the sections
    in these files, determines whether it should run it, by evaluating
    the 'SKIP' section. If the test is eligible for execution, the 'FILE'
    section is extracted into a ".php" file (with the same name besides 
    the extension) and gets executed.
    When an argument is given or TESTS environment variable is set, the
    GLOB is expanded by the shell and any file with extension "*.phpt" is
    regarded as a test file.
     Tester can easily execute tests selectively with as follows.
    Examples:
    ./sapi/cli/php run-tests.php ext/mbstring/*
    ./sapi/cli/php run-tests.php ext/mbstring/020.phpt

    [Test results]
    --------------
     Test results are printed to standard output. If there is a failed test, 
    the "run-tests.php" script saves the result, the expected result and the
    code executed to the test script directory. For example, if 
    ext/myext/tests/myext.phpt fails to pass, the following files are created:
    ext/myext/tests/myext.php   - actual test file executed
    ext/myext/tests/myext.log   - log of test execution (L)
    ext/myext/tests/myext.exp   - expected output (E)
    ext/myext/tests/myext.out   - output from test script (O)
    ext/myext/tests/myext.diff  - diff of .out and .exp (D)
     Failed tests are always bugs. Either the test is bugged or not considering
    factors applying to the tester's environment, or there is a bug in PHP.
    If this is a known bug, we strive to provide bug numbers, in either the
    test name or the file name. You can check the status of such a bug, by
    going to: http://bugs.php.net/12345 where 12345 is the bug number.
    For clarity and automated processing, bug numbers are prefixed by a hash
    sign '#' in test names and/or test cases are named bug12345.phpt.
    NOTE: The files generated by tests can be selected by setting the
    environment variable TEST_PHP_LOG_FORMAT. For each file you want to be
    generated use the character in brackets as shown above (default is LEOD).
    The php file will be generated always.
    NOTE: You can set environment variable TEST_PHP_DETAILED to enable
    detailed test information.
    [Automated Testing]
    --------------
     If you like to keep up to speed, with latest developments and quality
    assurance, setting the environment variable NO_INTERACTION to 1, will not
    prompt the tester for any user input.
    Normally, the exit status of "make test" is zero, regardless of the results
    of independent tests. Set the environment variable REPORT_EXIT_STATUS to 1,
    and "make test" will set the exit status ("$?") to non-zero, when an
    individual test has failed.
    Example script to be run by cron(1):
    ========== qa-test.sh =============
    #!/bin/sh
    CO_DIR=$HOME/cvs/php7
    MYMAIL=qa-test@domain.com
    TMPDIR=/var/tmp
    TODAY=`date +"%Y%m%d"`
    # Make sure compilation environment is correct
    CONFIGURE_OPTS='--disable-all --enable-cli --with-pcre'
    export MAKE=gmake
    export CC=gcc
    # Set test environment
    export NO_INTERACTION=1
    export REPORT_EXIT_STATUS=1
    cd $CO_DIR
    cvs update . >>$TMPDIR/phpqatest.$TODAY
    ./cvsclean ; ./buildconf ; ./configure $CONFIGURE_OPTS ; $MAKE
    $MAKE test >>$TMPDIR/phpqatest.$TODAY 2>&1
    if test $? -gt 0
    then
            cat $TMPDIR/phpqatest.$TODAY | mail -s"PHP-QA Test Failed for $TODAY" $MYMAIL
    fi
    ========== end of qa-test.sh =============
    NOTE: The exit status of run-tests.php will be 1 when
    REPORT_EXIT_STATUS is set. The result of "make test" may be higher
    than that. At present, gmake 3.79.1 returns 2, so it is
    advised to test for non-zero, rather then a specific value.

    [Creating new test files]
    -------------------------
     Writing test file is very easy if you are used to PHP. 
    See the HOWTO at http://qa.php.net/write-test.php

    [How to help us]
    ----------------
     If you find bug in PHP, you can submit bug report AND test script 
    for us. You don't have to write complete script, just give us test
    script with following format. Please test the script and make sure
    you write the correct ACTUAL OUTPUT and EXPECTED OUTPUT before you
    submit.
    <?php
    /* 
    Bug #12345
    substr() bug. Do not return expected string.
    ACTUAL OUTPUT
    XYXA
    EXPECTED OUTPUT
    ABCD
    */
    $str = "XYZABCD";
    echo substr($str,3,7);
    ?>
     

    12 downloads

       (0 reviews)

    0 comments

    Submitted

Sign in to follow this  

×
×
  • Create New...